the elektrikiçtesisatmuayeneuygunlukrapor

Electrical Internal Compliance Report

Our Expert Engineers and Authorities;
Electrical Internal Installation Inspection Compliance Report Inspection and Controls

Electrical Internal Installation Inspection Compliance Report

In the places where electrical devices such as an industrial facility, shopping center, residence, mosque, cinema, theater or hospital are located, all kinds of strong and weak current equipments that enable the operation and control of these devices are called electrical installations. Equipment in an electrical installation can include: electrical pipes, high and low current cables, cable ducts, sockets and switches, grounding cables, grounding conductors, electrical panels, supply and control equipment, junction boxes and terminal blocks and connectors.

Electrical installations are prepared in accordance with the Regulation on Electrical Interior Facilities and an electrical installation project is not permitted without the approval of the building inspection company. While preparing this project, necessary calculations should be done very well. The fact that the materials are larger than the required values ​​is a factor affecting the cost, while the low values ​​may cause the electrical installation not to be used efficiently.

The Electrical Indoor Facilities Directive was published in 2004 and contains the principles for the establishment and operation of the electrical indoor facilities. This regulation does not cover facilities within the structure for the generation and distribution of electrical energy.

The areas of application of this regulation are determined as follows:

  • In new facilities
  • In case the installed facilities need to be completely replaced
  • When there are obvious and certain circumstances that may cause death, injury or fire in installed facilities
  • In case of disturbances or changes in the installed facilities create significant confusion and hazards in other nearby facilities.
  • Extensions, modifications and repairs that do not affect an established

Pursuant to the aforementioned regulation, it is essential to use materials complying with Turkish standards in electrical installations.

Importance of Electrical Internal Installation Inspection

In the annex of the Regulation on Health and Safety in the Use of Work Equipment issued by the Ministry of Labor and Social Security, issues related to maintenance, repair and periodic checks (Annex-III), electrical internal installation inspection is included in the subject of installations. Accordingly, if no other time is specified in the relevant standards, the electrical internal installation inspection must be carried out at least once a year.

Periodic inspections must be carried out by electrical engineers, electrical technicians or high technicians. The controls and examinations to be performed outside these persons shall not be valid and the reports they prepare shall have no value. Because electrical internal installations are considered as work equipment with special risk according to the regulation. Works such as repairing, replacing, checking, maintaining and putting into service the equipment that have a special risk for the health and safety of the employees in an enterprise must only be performed by authorized persons.

The legal regulations and standards that must be observed in the electrical internal installation inspection are as follows:

  • Regulation on Grounding in Electrical Installations
  • Regulation on Electrical High Current Plants
  • Electrical Internal Facilities Regulation
  • TS EN 60079-14 Standard for electrical appliances
  • TS EN 60079-17 Standard for explosive gas environments
  • TS EN 61008-1 Standard for residual current circuit breakers

After the examinations to be carried out, an audit and inspection compliance certificate shall be issued for the internal electrical installations. In such a suitability study, starting from the general condition of the electrical internal installation, all electrical installations from the energy room, cable shaft, meter and distribution tables, motors, elevators, lighting systems, switches, cymbals, sockets and junction boxes are controlled. As a result, employers must take the necessary measures to ensure that the equipment to be used in the workplace does not harm employees' health and safety.

our organization TÜRCERT Technical Control and Certification Inc. provides electrical internal installation inspection services with a competent manager and employee staff and a strong infrastructure.

 

 



Electrical Internal Installation Inspection Compliance Report